Seiko 7C46 Dokumentacja Pobierz pdf (Strona 9)

※

The figure above is one example. Performance of your watch is different from above sample.

Performance and type

The case back shows the caliber and performance of your watch

Standard of time of

battery replacement

Refer to pages 71.

Water resistant

performance

Magnetic

resistant

performance

Refer to pages 64 and 65.

Caliber number

The number to identify

the type of your watch

Lumibrite

If your watch has Lumibrite

Lumibrite is a luminous paint that is completely harmless to human beings and natural environment, containing no noxious materials such as radioactive substance.

Lumibrite is a newly-developed luminous paint that absorbs the light energy of the sunlight and lighting apparatus in a short time and stores it to emit light in the dark.

For example, if exposed to a light of more than 500 lux for approximately 10 minutes, Lumibrite can emit light for 3 to 5 hours.

Please note, however, that, as Lumibrite emits the light it stores, the luminance level of the light decreases gradually over time. The duration of the emitted light may

also di󰮏er slightly depending on such factors as the brightness of the place where the watch is exposed to light and the distance from the light source to the watch.

Condition Illumination

Sunlight

Fine weather 100,000 lux

Cloudy weather 10,000 lux

Indoor (Window-

side during

daytime)

Fine weather more than 3,000 lux

Cloudy weather 1,000 to 3,000 lux

Rainy weather less than 1,000 lux

Lighting apparatus

(40-watt daylight

uorescent light)

Distance to the

watch: 1 m

1,000 lux

Distance to the watch: 3 m

500 lux (average room luminance)

Distance to the watch: 4 m

250 lux

Magnetic resistance （a󰮏ect of magnetic eld）

A󰮏ected by nearby magnetism, an analogue quartz watch may

temporarily gain or lose time or stop operating.

Diver's watches feature magnetic resistance which is equivalent to JIS Class 1.

Keep the watch more than 5 cm away from magnetic products.

Caution

Examples of common magnetic products that may a󰮏ect watches

Cellular phone

(speaker)

Bag

(with magnet buckle)

AC-powered shaver

Portable radio

(speaker)

Magnetic cooking device　　　

etc

Magnetic health belt

Magnetic necklace

Magnetic health mat

Magnetic health pillow

It is because the built-in motor of the watch, which harnesses

magnetic power and external strong magnetism, affect each

other to stop the motor or suppresses the turn of the motor.

The reason why analogue

quartz watch is a󰮏ected

by magnetism.

Band

The band touches the skin directly and becomes dirty with sweat or dust.

Therefore, lack of care may accelerate deterioration of the band or cause skin irritation

or stain on the sleeve edge. The watch requires a lot of attention for long usage.

● Metallic band

・

Moisture, sweat or soil will cause rust even on a stainless steel band if they are left for a long time.

・

Lack of care may cause a yellowish or gold stain on the lower sleeve edge of shirts.

・ Wipe o󰮏 moisture, sweat or soil with a soft cloth as soon as possible

・ To clean the soil around the joint gaps of the band, wipe it out in water and then

brush it o󰮏 with a soft toothbrush.

（Protect the watch body from water splashes by wrapping it up in plastic wrap etc.）

・ Because some titan bracelets use pins made of stainless steel, which has

outstanding strength, rust may form in the stainless steel parts.

・ If rust advances, pins may poke out or drop out, and the watch case may fall o󰮏

the bracelet, or the clasp may not open.

・ If a pin is poking out, personal injury may result. In such a case, refrain from

using the watch and request repair.

Notes on the

length of the band

Notes on skin

irritation and allergy

Skin irritation caused by a band has various reasons such as allergy to metals

or leathers, or skin reactions against friction on dust or the band itself.

Adjust the band to allow a little clearance with your wrist to

ensure proper airow. When wearing the watch, leave enough

room to insert a nger between the band and your wrist.

● Polyurethane band

・ A polyurethane band is susceptible to discoloration from light, and may be

deteriorated by solvent or atmospheric humidity.

・ Especially a translucent, white, or pale colored band easily adsorbs other colors,

resulting in color smears or discoloration.

・ Wash out dirt in water and clean it o󰮏 with a dry cloth.

（Protect the watch body from water splashes by wrapping it up in plastic wrap etc.）

・

When the band becomes less exible or cracked, replace the band with a new one.

How to use the Diver Adjuster

Flap

Clasp

pushbutton

Slider

6-1

6-2

Flap

The Diver Adjuster is a bracelet mechanism to adjust the bracelet length of your Diver's watch.

It is very useful when you wear the watch over a wet suit.

Press the ap down further approximately

20°, and hold it there.

　

Lift up the ap approximately 90°until it stands upright.

・

Youmayfeelslightresistance,butdoingthisrequiresonlyalightforce.



Pleasedonotpushtheapdownforcibly.

Lightly pull the bracelet on the 6 o'clock side of

the watch along the curved line of the bracelet.

・Again,doingthisrequiresonly alightforce.

Pleasedonotpullthebraceletforcibly.

・Theslider can bepulled out approximately

30mm.Becarefulnottopullitoutforcibly

Braceletonthe6o'clock

sideofyourwatch

Braceletonthe12

o'clocksideofyourwatch

Close the clasp first （6-1 in

the illustration） and then, the

ap （6-2 in the illustration.）

Press the push button.

With the hand which is not wearing

the watch, adjust the length of

the slider so that the watch fits

well around your wrist.

Lift up the clasp to release the buckle, and strap the watch on

your wrist.

1 2 3 4 5 6 7 8 9 10

Komentarze do niniejszej Instrukcji

Brak uwag

Seiko 7C46 Dokumentacja Strona 9

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie Seiko 7C46