Seiko SLP410 Podręcznik Użytkownika Pobierz pdf (Strona 15)

6 Close the label cover.

Testing the Printer

A quick test lets you know your printer is operating properly and that the labels

are loaded correctly.

Testing the SLP 410, 420 or 430

1 Press and hold the power button for 2 seconds to turn the printer off.

2 Press and hold the form feed button while you press and release the button.

If the test is successful, the SLP 410/420/430 will print a test label

Testing the SLP 440 or 450

1 Press and hold the power button for 2 seconds to turn the printer off.

2 Press and hold the form feed button until the LED begins to ﬂash green.

Do not release.

3 To print the SII graphic logo:

• While holding the button, press the power button 1x and release both buttons.

4 To print the SII sample address label:

• While holding the button, press the power button 2x and release both buttons.

5 To print the density test:

• While holding the button, press the power button 3x and release both buttons.

6 To print the serial number and firmware:

• While holding the button, press the power button 4x and release both buttons.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Brak uwag

Seiko SLP410 Podręcznik Użytkownika Strona 15